Installation & Systems Manual RUBIDIUM SERIES
Page 5
4 SOFTWARE TOOLS FOR RUBIDIUM SERIES 74
4.1 THE RUBIDIUM CONFIGURATION PC PROGRAM 74
4.1.1 Overview 74
4.1.2 Installation 74
4.1.3 Connection to RUBIDIUM SERIES Chassis 75
4.1.4 Starting the Program 76
4.1.5 Overview of Tab Functions 77
4.1.6 Store a Set-Up to a File, Load and Update the Set-Up of a Module 78
4.1.7 The “Profile” Tab: Store and Load a Complete Set-Up on the Module 79
4.1.8 The “System” Tab: Module Identification, Reset, SNMP, Fan Control 80
4.2 THE RUBIDIUM SERIES HTTP SERVER 82
4.2.1 Overview, Connecting the IE Module 82
4.2.2 IP Configuration 83
4.2.3 The Rubidium Homepage 84
4.2.4 Browser Requirements 84
4.2.5 Accessing a Configurable Module 85
4.2.6 The “Functions“ Page 86
4.2.7 The “Profile“ Page: Store and Load Set-Ups on the Module or on the PC 87
4.2.8 The “System“ Page: Module Identification, Reset, SNMP, Fan Control 89
4.3 THE STATUS MONITOR 90
4.3.1 Status Monitor by IE Module 90
4.3.2 Status Monitor by PC Program 91
4.3.3 Status of Fans and Power Supplies 92
To Next Page
Loading...