Alpermann+Velte RUBIDIUM - Status Monitor via PC Program

Installation & Systems Manual RUBIDIUM SERIES
Page 91
4.3.2 Status Monitor by PC Program
The PC program RubStatSE.exe uses the PC interface (RS232 or USB) of the RUBIDIUM
housing. This program is part of the “Rubidium Configuration and Status Monitor PC
Programs” packet you can download at:
http://www.alpermann-velte.com/serv_e/softw
are_e/software_e.html.
Execute this program, select the COM port or USB connection and press the scan button to
get a list of the modules plugged to this housing. Select the module and press the connect
button.
RubStatSE.exe.
Requirements:
 Please have Java Runtime Environment 1.6.0 or higher installed (for example download
at www.java.com
).
 For a Windows operating system: Please follow the description of
RubStatSE_Readme.txt.
 For a Linux operating system: Available on request.