Click on the SCREEN SAVER tab then set the screen saver to NONE.
Click on the POWER button then set the Power Schemes to ALWAYS ON, set the TURN
OFF MONITOR option to NEVER and set the TURN OFF HARD DISKS option to NEVER.
3.6
USB
PRINTER
Using a stylus, double click on the PRINTERS AND FAXES Icon in the Control Panel to
display the settings screen.
Note that the PDF Printer is already installed and is set as the default printer. This will be
used for all printed reports so an actual printer is not necessary unless direct printing is
required. The PDF printouts can be transferred to another PC for printing if required.
If a USB printer is required, this can be added and configured using the "ADD A PRINTER"
option on the left hand side of the screen. Note that the printer driver may need to be
installed by copying the files to a USB memory stick.
NOTE: To select a new printer as the default it must be done in the MyUser account not
administrator account. To get to the MyUser account Logout of the “MyUser” account and
login to “administrator” (no password required) account. Once in the “administrator” account
select “Start” -> Run -> Explorer -> My Computer -> New Volume C: -> Documents and
Settings -> MyUser folder and double click on file “DisableAutoStart.bat”. This will change
the file CSx.exe to CSx1.exe.
Then logout of the “administrator” account and log back into the “MyUser” account (Ametek
Logo) by selecting Start -> Log Off -> Log Off -> MyUser (no password). Then in Control
Panel select the new USB Printer as default. Once the default printer is selected, exit
Control Panel.
Select “Start” -> Run -> Explorer -> My Computer -> New Volume C: -> Documents and
Settings -> MyUser folder and double click on file “EnableAutoStart.bat”. This will change
the file CSx1.exe back to CSx.exe.
CS User Manual
27
To Next Page
Loading...
Need help?
General
