the CS Series console will automatically archive the data after 500 test runs to the default
folder C:\Documents and Settings\MyUser.
If the specified drive for the data archive is not available at the time of the archive the test
data will go to the default location C:\Documents and Settings\MyUser folder.
8.9
DISPLAYING THE TEST GRAPH
SCREEN
After the Export Settings have been set, press on the "FINISH" button at the bottom of the
screen to display the "TEST GRAPH" screen.
This screen has a title showing the previously entered test name.
Please refer to section 10 for details regarding test samples.
CS User Manual
59
To Next Page
Loading...
Need help?
General
