WARRANTY
This instrument is warranted against defects in workmanship, material and design for one (1)
year from the date of delivery to the extent that AMETEK will, at its sole option, repair or
replace the instrument or any part thereof which is defective, provided, however, that this
warranty shall not apply to instruments subjected to tampering or, abuse, or exposed to highly
corrosive conditions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED AND AMETEK HEREBY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING,
WITHOUT LIMITA- TION, ANY WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY. AMETEK SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO,
ANY ANTICIPATED OR LOST PROFITS.
This warranty is null and void if the purchaser fails to follow any and all instructions,
warnings or cautions in the instrument’s Instruction Manual.
If a manufacturing defect is found, AMETEK will replace or repair the instrument or replace
any defective part thereof without charge; however, AMETEK’s obligation hereunder does
not include the cost of transportation, which must be borne by the customer. AMETEK
assumes no responsibility for damage in transit, and the purchaser should present any
claims for such damage to the carrier.
TRADEMARKS
AMETEK is
a
registered trademark of
AMETEK,
Inc. CHATILLON
is a
trademark
of
AMETEK,
Inc.
Other trademarks are the property of
their
respective
owners.
SUPPORT
AMETEK Lloyd Instruments Ltd
Steyning Way
Bognor Regis
West Sussex
UK
PO22 9ST
Tel: +44 (0) 1243 833 370
Fax: +44 (0) 1243 833 401
techsupport@ametek.co.uk
www.lloyd-instruments.co.uk
AMETEK Measurement and Calibration
Technologies
8600 Somerset Drive
Largo, FL 33773
USA
Tel: +1-727-536-7831
Tel: +1-800-527-9999 (within USA only)
www.chatillon.com
CAUTION!
HIGH FORCES ARE OFTEN
INVOLVED WITH THE MATERIAL
TESTING PROCESSES.
The machine is powered by mains
supply voltage
The machine is a Class 1 product, which
means it MUST be connected to a mains
socket outlet with a PROTECTIVE EARTH
CONNECTION
Do not position the equipment so that it is
difficult to operate the mains disconnect
device (machine mains inlet socket)
If the equipment is used in a manner not
specified by the manufacturer, the
protection provided by the equipment may
be impaired
To maintain all aspects of the specification,
only Chatillon approved accessories
connections and components should be
used
Strictly adhere to all specified safety
procedures
PLEASE READ THIS MANUAL
BEFORE USING THE FORCE
TESTING MACHINE.
2 CS User Manual
To Next Page
Loading...
