Note that the "HOME" screen has 4 Icons along the top if the operator is defined as a
Supervisor, but only 2 Icons along the top if the operator is defined as a User, i.e. this
operator has restricted access rights.
Home Screen for a
Supervisor
Home Screen for a
User
A previously saved test file can be loaded by pressing on the large “LOAD A SAVED TEST
FILE” Icon on the main screen or the small Icon at the top left of the screen. In both cases,
the “TEST SELECTION” screen is displayed which shows all the test files present in the
internal memory.
CS User Manual
91
To Next Page
Loading...
