The test files can be displayed in "REVERSE Date” order by pressing on the “DATE” button
along the top of the screen.
Note that the “Date” is the date that the test file was created. The newest test file is listed first
then the other files are listed in descending order of date of creation.
The test files can be displayed in “REVERSE Number of Tests” order by pressing on the
“RUN” button along the top of the screen. The test file with the greatest number of tests is
listed first then the other files are listed in descending order of number of tests.
If any test files have been assigned as “Favorites” (see next section), then these will be listed
first by pressing on the “FAVORITES” button along the top of the screen. This makes it
easy
to
assign the favorite tests as shown in the next section.
Press on the required test file to select it, noting that the selected test Icon will be outlined in
blue as shown below.
Also note that additional buttons will be displayed along the bottom of the screen for a
"Supervisor".
CS User Manual
93
To Next Page
Loading...
