6 2014-07-30 127139 13
1.0 Introduction
Congratulations on your new AMETEK JOFRA RTC
Calibrator!
With this AMETEK JOFRA calibrator, you have chosen an extremely
effective instrument, which we hope will live up to all your expectations.
Over the past many years, we have acquired extensive knowledge of
industrial temperature calibration. This expertise is reflected in our
products, which are all designed for daily use in an industrial
environment. Please note that we are very interested in hearing from
you, if you have any ideas or suggestions for changes to our products.
This reference manual applies to the following instruments:
JOFRA RTC-156 A - Temperature calibrator
JOFRA RTC-156 B - Temperature calibrator with sensor and
reference inputs
JOFRA RTC-156 C - Temperature calibrator with reference input
JOFRA RTC-157 A – Temperature calibrator
JOFRA RTC-157 B – Temperature calibrator with sensor and
reference inputs
JOFRA RTC-157 C - Temperature calibrator with reference input
JOFRA RTC-158 A – Temperature calibrator
JOFRA RTC-158 B – Temperature calibrator with sensor and
reference inputs
JOFRA RTC-158 C - Temperature calibrator with reference input
JOFRA RTC-159 A – Temperature calibrator
JOFRA RTC-159 B – Temperature calibrator with sensor and
reference inputs
JOFRA RTC-159 C - Temperature calibrator with reference input
JOFRA RTC-250 A – Temperature calibrator
JOFRA RTC-250 B – Temperature calibrator with sensor and
reference inputs
JOFRA RTC-250 C - Temperature calibrator with reference input
JOFRA RTC-700 A - Temperature calibrator
JOFRA RTC-700 B - Temperature calibrator with sensor and
reference inputs
JOFRA RTC-700 C - Temperature calibrator with reference input