Ametek JOFRA RTC-156 B

16 2014-07-30 127139 13
3.0 Setting up the calibrator
3.1 Receipt of the calibrator
When you receive the instrument…
 Carefully unpack and check the calibrator and the accessories.
 Check the parts against the list shown below.
If any of the parts are missing or damaged, please contact the
dealer who sold the calibrator.
You should receive:
 1 calibrator
 1 mains cable
 2 sets of test cables (2 black, 2 red –
B versions only)
 1 USB key containing software package
“JOFRACAL” and reference manual
 1 USB cable
 1 tool for insertion tube