127139 13 2014-07-30 93
4.12 Selecting the stirrer speed (RTC-158/250
A/B/C only)
Use the NUMERIC keys to enter a value, or or to
accept the value. When pressing the ACTION key or the
ENTER key the calibrator returns to the main menu screen.
Select a speed setting between 0 and 100.
The normal setting is between 30 and 40.
When using the RTC-158/250 A/B/C with a dry block kit the
stirrer speed must be set to 0.
The DLC will be disabled when the stirrer is started
The Sensor Setup can be entered through the vertical menu
(press )
Use the ARROW keys to select “Stirrer Speed”.
To Next Page
Loading...
