100 2014-07-30 127139 13
5.1.2 Transporting the liquid bath calibrator
Warning
Do not move the liquid bath calibrator containing hot fluid.
When spilled the fluid might cause serious wounds. Before
transporting the fluid it must be cooled down to a temperature
near ambient.
When the fluid has cooled down it is possible to move the liquid bath
calibrator by hand. The special designed lid must be used to reduce
the risk of spilling. Please notice that the lid is not completely fluid tight.
For any longer form of transportation the fluid must be removed.
(see section 5.2).
5.2 Emptying the well (liquid baths only)
It is not recommendable to leave the fluid in the well for long-term
storage. The best way to store the fluid is in its original airtight
container.
Caution – Hot surface
Do not handle hot fluid.
Do not attempt to remove hot fluid with the liquid drainage
tube, as it might melt.
Do not leave any fluid (silicone oil) in the spill tray.
Do not touch the items removed from the well – they may
be very hot and cause burns.
Never leave hot items, which have been removed from the
well, unsupervised – they may constitute a fire hazard or
personal injury.
To Next Page
Loading...
Need help?
General
