Ametek JOFRA RTC-156 B User Manual

70 2014-07-30 127139 13

Select “Discard
2
” to delete the results from the screen.
Note…
A hysteresis result is only measured when hysteresis is set
to “Yes”.
You will then automatically return to the Switchtest setup
menu.

If no change in the switch position is registered during the
test a red cross will be displayed in the Result list instead of
a green check .
Delete the result by selecting “Discard
2
” or save the result
by selecting “Save
1
”.

Ametek JOFRA RTC-156 B Specifications

General

Brand	Ametek
Model	JOFRA RTC-156 B
Category	Measuring Instruments
Language	English