Ametek OXYvisor - 2�7�3 Class I, Division 2 Groups A,B,C, & D; Product Label; Name Plate - (Pending Final Approvals); Product Label; Name Plate Overview (Pending Final Approvals); Figure 6 - Oxyvisor Product Label; Name Plate

19
Installation, Operation & Maintenance Manual
OXYvisor Optical Oxygen Analyzer
2.8 Product Label / Name Plate - (Pending Final Approvals)
Class I, Division 2, Groups A, B, C, & D T4A
2.8.1 - Product Label / Name Plate Overview (Pending Final Approvals)
2�7�3 Class I, Division 2 Groups A,B,C, & D
IECEx Zone 2, Group IIC Markings:
The Product Label (Name Plate) is found at the top of the analyzer (Figure 4). The product label identies
important information and attributes of the specic model and should be reviewed in detail prior to installation.
US Standards: UL 12.12.01 - Edition 9 Issued 2017/09/15
CAN Standards: CSA C22.2 No. 213-17 - Edition 3 Issued 2017/09/15
The OXYvisor is certied as Process Control Equipment for use in hazardous locations (QUZW, QUZW7)
Class I, Division 2 Groups A, B, C, & D
OXYvisor
II 2 G Ex db op is IIC T4 Gb
Ex db op is IIC T4 Gb
Ta = -20°C to +55°C, IP 66, NEMA 4x
Class I Zone 1 AEx db op is IIC T4 Gb
Ex db op is IIC T4 Gb
Installation DWG# 2P0345
0539
IECEx UL 18.0033
DEMKO 18 ATEX 2031
AVERTISSEMENT: Ne pas ouvrir quand une atmosphère
explosive est présente. Sceller toutes les sorties de câbles
conformément aux codes gouvernementaux et locaux.
WARNING: Do not open when an explosive
atmosphere is present. Seal all cable exits in
accordance with government and local code.
!
!
Made in Carson City NV - USA
www.BarbenAnalytical.com
Model#
Serial #
Power:
RoHS
!
WARNING: Consult Conditions of Safe Use in installation
manual and DWG# 2P0345 to preserve the protection
aorded by the equipment.
!
AVERTISSEMENT: Consultez les conditions d'utilisation
sécurisée du manuel d'installation et le DWG n° 2P0345
pour préserver la protection oerte par l'équipement.
BOA-DC-1-SFP-B-SI
YYMM -0000-1234XYZ
21.6 - 26.4 VDC
5 Watts
E502700 Process Control Equipment for
Use in Zone Classied Hazardous Locations
Branding Logo
Parent Company
Logo
Product Name
Serial # contains the
date of manufac-
ture. The rst four
numbers are YYMM
Power: Acceptable
range, power type
and max wattage
drawn
Installation Drawing
contains critical informa-
tion about the installation
requirements. This must
be reviewed prio to instal-
laltion.
Important Warnings! that
should be adhered to at
all times.
Hazardous Area Markings
Figure 6 - OXYvisor Product Label / Name Plate
Section 2
Technical Product Specication
Ex ec ic op is IIC T4 Gc
Class 1 Zone 2 AEx ec ic op is IIC T4 Gc
Class 1 Zone 2 Ex ec ic op is IIC T4 Gc
Certicate Number: IECEx UL 18.003Xx
North American Zone 2, Group IIC Markings:
Standards: IEC 60079-0, Edition 6, Issued 2014-10
IEC 60079-7, Edition 5.1, Issued 2014-06
IEC 60079-11, Edition 6, Issued 2014-10
IEC 60079-28, Edition 2, Issued 2015-05
IEC 61010-2-201 Edition 1, Issued 2013
US Standards: UL 60079-0, Edition 6, Dated 2017/10/20
UL 60079-7, Edition 5.1, Dated 2017/04/21
UL 60079-11, Edition 6, Dated 2014/03/28
UL 60079-28, Edition 2, Dated 2017/12/08
CAN Standards: CSA C22.2 No. 60079-0, Edition 3, Issue Date 2015/10/01
UL 60079-7 Edition 2, Issue Date 2016/
UL 60079-11, Edition 2, Issue Date 2014/02/01
UL 60079-28, Edition 1, Issue Date 2016/