S-4000
1-59
Revised 01/2005
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
ADJUSTMENTS
Second looper adjustment
Since both loopers function is the same, the following instructions and illustrations apply to both
the first and second loopers.
Position the second q looper adjust similar to the first looper since point 5.
Install the cover, clamp plate, throat plate and pick-up hook.
Thread the needle, place fabric under the clamps, tip the machine back on the hinges and rotate
the drive pulley forward while observing the sewing action.
To Next Page
Loading...
