Safety information 31
1201281 A | 24.07.2013
Fig. 3-2 Never fold the ROPS down during operation
NOTE Check that:
• The roller chassis is not bent or cracked in the area of the ROPS mounting.
• The ROPS has no cracks or fractures.
• All screw connections are tight (observe tightening torque).
3.4 Noise levels
The following noise level measurements were carried out by an accredited testing
and monitoring body in accordance with machine directive 2000/14/EEC of the
European parliament and council.
Inspecting and monitoring organization: TÜV Österreich (Austrian technical
inspectorate) Testing body no. 0408
WARNING
Danger of accident due to alterations to the ROPS!
Safety is no longer ensured if unqualified modifications or
alterations are made on the ROPS.
• Do not make any modifications to the ROPS without the
permission of the manufacturer.
WARNING
Hearing damage due to continuous noise level!
Depending on the use of equipment it is possible that the
allowed noise level of 85dB (A) will be exceeded.
• Wear ear protectors in accordance with national accident
prevention regulations when working at higher noise levels.
To Next Page
Loading...
