Ammann ASC 110 - Page 21

15ASC 110
SPECIFICATION MANUAL
ASC 110 Cummins Tier 3
D HD HT PD HDPD HTPD
Driving characteristics
Number of speeds - 3+1 3+1 3+1 3+1 3+1 3+1
Maximum transport
speed
km/h (MPH) 12,8 (6,9) 9,2 (5,7) 8,2 (5,1) 12,8 (6,9) 9,6 (5,96) 8,6 (5,34)
Working speed 1 km/h (MPH) 2,5 (1,55) 2,5 (1,55) 2,4 (1,49) 2,5 (1,55) 2,5 (1,55) 2,4 (1,49)
Working speed 2 km/h (MPH) 3,5 (2,17) 3,1 (1,93) 3,1 (1,93) 3,5 (2,17) 3,1 (1,93) 3,1 (1,93)
Working speed 3 km/h (MPH) 5,6 (3,4) 4,1 (2,54) 3,7 (2,3) 5,6 (3,47) 4,2 (2,61) 3,8 (2,36)
Climbing ability % 45 55 60 45 55 60
Climbing ability with
vibration
% 45 55 60 45 55 60
Lateral static stability % 72,65 72,65 72,65 72,65 72,65 72,65
Lateral stability du-
ring driving without
vibration
% 25 25 25 25 25 25
Lateral stability
during driving with
vibration
% 15 15 15 15 15 15
Maximum gradient
when towing machi-
ne on slope
% 60 60 60 60 60 60
Turning radius inner
(edge)
mm (in) 3050 (120,0) 3050 (120,0) 3050 (120,0) 3050 (120,0) 3050 (120,0) 3050 (120,0)
Turning radius outer
(contour)
mm (in) 5370 (211,4) 5370 (211,4) 5370 (211,4) 5370 (211,4) 5370 (211,4) 5370 (211,4)
Front approach
slope
% 65 65 65 65 65 65
Rear approach slope %
53 53 53 53 53 53
Type of drive - Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic
Number of driving
axles
- 2 2 2 2 2 2
Oscillation angle ° ±10 ±10 ±10 ±10 ±10 ±10
Angle of steering ° ±36 ±36 ±36 ±36 ±36 ±36
Steering
Type of steering - Joint Joint Joint Joint Joint Joint
Steering control - Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
Linear hydraulic
motors
- 2 2 2 2 2 2