28247T3
D MAX 45 %
HD MAX 55 %
HT MAX 60 %
For the maximum permissible slope gra-
dient when driving uphill and across the
slope gradient, see gures.
The values given are lower depending
on adhesive conditions and the machine
instantaneous weight!
Do NOT load engine at full capacity until
it reaches 60 °C (140 °F) temperature.
Do NOT turn OFF the controller at high
speed - sudden deceleration (retarda-
tion) will occur followed by an impact
within hydraulic system. Turn OFF the
controller at low speed or with standing
Machine!
When driving in a dicult terrain with an impaired adhe- •
sion, turn on the ATC function (optional equipment). After
leaving the dicult terrain, turn o the function.
Note
The function can be activated in both modes – working and
transport speeds.
To Next Page
Loading...
