EasyManua.ls Logo

Ammann ASC 130 - Hydraulic Oil

Ammann ASC 130
198 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129ASC110 / ASC130 / ASC150
MAINTENANCE MANUALMAINTENANCE MANUAL
3.2.4. Hydraulic oil
For use in the hydraulic system of the machine, only high-
quality hydraulic oils of output class according to ISO
6743/HV (equal to DIN 51524 part 3 HVLP; CETOP RP 91
H).
The machines are filled with hydraulic oil of kinetic visco-
sity 68 mm
2
/s at 40 °C (104 °F) ISO VG 68 by the manufactu-
rer. This particular oil is suited for applications in the
widest range of ambient temperatures.
! NOTE !
At high ambient temperatures, when the oil tempe-
rature reaches continual 90 °C (194 °F), we recom-
mend replacing the oil with one of kinetic viscosity
100 mm
2
/s - HV 100 (BP BARTRAN HV 100; ESSO
UNIVIS N 100, etc.)
Should it be required to start the machine at
temperatures below –8 °C (18 °F) lasting more than
one month, replace oil in the hydraulic system with
one of kinetic viscosity 46 mm
2
/s - viscosity class
HV 46.
At temperatures below –13 °C (9 °F), replace oil
with one of kinetic viscosity 32 mm
2
/s - viscosity
class HV 32, such as BP BARTRAN HV 32, ESSO
UNIVIS N 32, etc.) see Operating Instructions
chapt. 2.9.3.
Synthetic hydraulic oil
Hydraulic system can be filled with synthetic oil, such as
PANOLIN - HLP Synth. 15/22/32/68 that is completely
degradable by microorganisms found in water and soil in
case of leak.
! NOTE !
Water content (condensation water) in oil must not
exceed the limit of 0,1%.
Operating fluid must be checked by taking samples
in regular intervals - see the chart.
When filling older machines with synthetic oil, the
residual limit of mineral oils must not exceed 8% of
the total fill.
When filling biologically degradable oils, mixing
with up to 2% of the total tank content is allowed.
When changing over from mineral oil to synthetic or
when mixing oils of different brands, always
consult the procedure with the oil manufacturer or
dealer!
ybderutcafunaM liofotroS
VH/3476OSInossalctuptuO )PLVH(VH
ssalcytisocsiV
91515NID,4/3476OSIno
86GV
ssalcytisocsiV
H19PRPOTECno
86VH
PIGA86ACINRAPIGA
AIVA86IVHBULIVA
PB86VHNARTRAB
LORTSAC86HWANIPSYH
NORVEHCVH86PE
FLE86FLERDYH
OSSE86NSIVINU
ANIF86VHNARDYH
SHCUFVH86RMNILONER
LIBOM61ETDLIBOM
VMÖ86M-PLH
LLEHS86TSULLET
OCAXET86ZCDHLIOODNAR
LATOT86SZSIVIUQE
gnikatfolavretnI
selpmas
nommoC
noitarepo
emertxE
snoitidnoc
kcehc.1h005h052
kcehc.2h0001h005
skcehctneuqesbus
ecnoroh0001
raeya
aecnoroh005
raey

Table of Contents

Other manuals for Ammann ASC 130

Related product manuals