Ammann ASC 130 - Work Safety Precepts on Behalf of the Operator

42 ASC110/ASC130/ASC150/ASC200/ASC250
2.1. Safety Regulations
2.1.1.3. Work safety precepts on behalf of the
operator
The operator
• must make sure that the machine is operated only
under conditions and for the purpose to which the
machine has been designed as defined by the manu-
facturer and applicable standards,
• must make sure that the vibration roller is used only
under such conditions and in such locations where
there is no danger of transmitting vibrations and cau-
sing damage to nearby structures, etc.,
• must provide for regular inspection of operations,
technical conditions, for regular maintenance at inter-
vals specified in the Instructions for Maintenance and
Lubrication. In cases of noncompliance to such de-
gree that would endanger safe operation, personnel,
property, and the environment, the machine must be
removed from operations until the defects have been
corrected,
• must define who may perform specific functions during
operations, maintenance, and repairs of the machine,
• everybody who drives, maintains, and repairs the
machine must be acquainted with the rules listed in the
Operation Manual for the machine
• must provide for the fire extinguisher to be checked
regularly,
• must store the Operations Manual and the Operations
Diary in the defined location, the seat box, to be
available to the driver at all times
• must provide a steady supervision by a defined worker
during operations on public roads, and in particular
must issue work safety regulations,
• must provide for the removal of dangerous matters
(fuel, oil, cooling fluid, etc.) from spots of leakage in
line with their nature to prevent any adverse effect on
the environment, work safety and health of personnel.
When using ROPS frame
• the machine frame in the spot of connection must not
be damaged (broken bent, etc.)
• the ROPS frame itself must not be corroded, damaged,
or show any hair fractures or breaks,
• the ROPS frame must not be loose during operation,
• all screw connections must be as specified and tigh-
tened to the specified torque,
• the bolts must not be damaged, deformed, and/or
corroded,
• the ROPS frame must not be modified without the
manufacturer’s approval, since its firmness could be
affected (such as holes, welds, etc.),
• the weight of the machine with the protective frame
may not exceed approved weight for which the ROPS
has been approved.