12 ASC 130
1.1. Basic Data
Introduction
Single drum vibratory rollers ASC 130 is outstanding by
their up-to-date design, adopted technologies, as well as
modern styling. These machines offer maximal comfort to
the operator, are easy to operate, extremely reliable and
require minimal maintenance. The utilized frequency,
amplitude and centrifugal force of vibration were optimi-
zed by means of compaction tests to reach extra high
compaction effect on various materials.
Application Range
The vibratory rollers of ASC 130 is especially suitable for
use at mid- and large compaction jobs of highway con-
struction (construction of highways, railways, airports),
hydraulic construction (earth dams) and civil engineering
(industrial areas, ports etc.).
The rollers are designated for operation under conditions
as according to IEC 721-2-1 (038900): WT, WDr, MWDr
(i.e. moderate, warm dry, hot dry) with temperature limits
from -15°C (5°F) to +45°C (113°F).
Modifications
The single drum vibratory roller ASC 130 D with the
smooth drum is suitable for compaction of all kinds of soil.
It can be employed at compaction of clayey soils up to the
layer thickness (compacted) of 27 cm (10,6 in), loam soils
up to the layer thickness of 45 cm (17,7 in), mixed soils up
to the layer thickness of 60 cm (23,6 in), sandy soils and
rockfills up to the layer thickness of 70 cm (27,5 in), gravels
up to the layer thickness of 100 cm (39,4 in). Maximal
allowed grain size is up to 2/3 of total layer thickness. The
roller is suitable for compaction of stabilized soils as well.
The padfoot roller ASC 130 PD (where the vibratory and
masticating effect act simultaneously) is suitable mainly
for compaction of clayey soils up to the layer thickness
(compacted) of 32 cm (12,6 in), loam soils up to the layer
thickness of 45 cm (17,7 in), and mixed soils up to the layer
thickness of 60 cm (23,6 in).
Vibratory roller ASC 130 HD with increased traction force
- smooth drum.
Vibratory roller ASC 130 HDPD with increased traction
force – padded drum.
Vibratory roller ASC 130 HT for permanently hard condi-
tions and on slopes above 30% - smooth drum.
Vibratory roller ASC 130 HTPD for permanently hard
conditions and on slopes above 30% - padded drum.
Vibratory roller ASC 130 PDB with padded drum and a
blade for material spread. Blade is optional per order.
The machine meets the requirements for “CE” mark and
the requirements due to the law no. 22/1997 Sb. (i.e. CSN
EN 500-1,4 and next) for the Czech Republic and Directive
2000/14/EC (EN ISO 3744).
In the course of proposal has been respected requiere-
ments of international norms for hygiene, ergonomi and
safety. The machine fulfil conditions for „CE“ mark.
Pin label - CE
The machine which does not meet requirements accor-
ding to „CE“ specification there is not „CE“ mark.
Pin label
To Next Page
Loading...
