90 ASC110/ASC130/ASC150/ASC200/ASC250
2.7. Controlling and operation of the machine
2.7.4. Stopping the machine and engine
• Use switch (6) to deactivate vibration - signal lamp (28)
will go off.
• Use control (1) to stop the machine - signal lamps (23)
and (24) will light up. Brake the machine with a switch
(4).
••
••
• Press button (15) to adjust idling speed.
• Turn the ignition key to ”0” position and take it out.
Close the ignition box cover.
! NOTE !
Do not stop the engine immediately; let it idle for 3
minutes to cool it down and turbocharger.
To Next Page
Loading...
