89ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
2.7.3. Travel with vibration
• Turn off gear selector (2) to set the working gear mode.
• Switch pre-selector (3) to appropriate working gear
range.
• Use pre-selector (40) to turn on vibration amplitude.
• Use selector (8) to adjust maximum engine speed. The
switch (15) must be switched off.
• Start moving and use switch (6) to turn on vibration.
Signal lamp (28) will light up; the drum will start
vibrating.
• Press and release switch (6) to stop vibration.
Note:
The machine should reach speed of 1800 rpm before
activating vibration.
To Next Page
Loading...
