151ASC110 / ASC130 / ASC150
MAINTENANCE MANUAL
Every 250 Hours or Once in 3 MonthsEvery 250 Hours or Once in 3 Months
3.6.17. Lubrication of the machine
• Place the roller onto flat, firm surface.
• Stop the engine and disconnect electric system using
the isolating master switch.
• Remove the caps on the grease nipples.
• Successively mount the grease nipple of pressure
lubricator and continue greasing until the old grease
starts to drain out.
• Return the grease nipple caps.
lower bearing
bearing 4x
Steering
upper bearing
To Next Page
Loading...
