Ammann ASC 130 - Exchanging Cleaner Elements of Air Cleaner; Maintenance - as Needed

175ASC110 / ASC130 / ASC150
MAINTENANCE MANUAL
1
2
2
Maintenance - As Needed
3.6.33. Exchanging cleaner elements of air
cleaner
NOTE
The air cleaner contains the main and safety elements.
! NOTE !
If signal lamp (25) lights up, the both elements
must be exchanged.
• Place the roller onto flat, firm surface.
• Stop the engine and disconnect electric system.
• Lift the bonnet to the limit position. (See Operating
instructions, chapter 2.7.10.)
• Unscrew the wing nut (1).
• Carefully remove the cover with the main element (2).
Maintenance - As Needed
• Clean the inside of the cleaner and contact surface in
order that the engine inlet pipe does not get blocked.
Check connections and piping for any untightness and
clogging of the engine inlet opening on the bonnet
(e.g. by leaves).
• After unscrewing nut (2), remove the safety element.