176 ASC110 / ASC130 / ASC150
3.6. Individual Operations of Maintenance
1
Maintenance - As Needed Maintenance - As Needed
• Replace the safety element.
• Mount new main element. Check whether it fits cor-
rectly and whether it is tight.
• Remove the dust valve (1), clean it and mount it back.
! NOTE !
Do not clean the inside of the cleaner by pressure
air; dust might get into the engine inlet piping.
Replace both elements after 1 year of service at
the leatest.
Replace the sealing nut with a new one when
replacing the element.
Use original elements only.
When washing the machine, make sure water
cannot pour into the air cleaner.
In case of absorbing water, exchange main element.
Dry the cleaner body.
Replace defective vacuum valve immediately!
Do not operate the machine with damaged cleaner
body or cover.
To Next Page
Loading...
