Ammann ASC 130 - Checking the Damping System

164 ASC110 / ASC130 / ASC150
3.6. Individual Operations of Maintenance
Every 1000 Hours or Once a Year Every 1000 Hours or Once a Year
3.6.26. Checking the damping system
• Check the condition of metal-rubber mountings and
bonding of metal with rubber.
Drum damping system - left side;
Drum damping system - right side;
Front metal-rubber mountings - driver’s post
Rear metal-rubber mountings - driver’s post
Front metal-rubber mountings of the engine
Rear metal-rubber mountings of the engine
• Replace damaged mountings.
• Check again tightening of bolts and nuts.