163ASC110 / ASC130 / ASC150
MAINTENANCE MANUAL
3
1
2
Every 1000 Hours or Once a Year Every 1000 Hours or Once a Year
Drum gearbox - right side
• Place the roller onto a flat, firm surface.
• Unscrew cover.
! NOTE !
Perform the first oil exchange after reaching 100
operation hours.
Do not touch the gearbox and adjacent
parts if they are hot.
• Clean the area around plugs.
• Put appropriate vessel under the drain plug (3).
• Unscrew all plugs (1), (2), (3) and let oil drain.
• Mount the drain plug (3) after draining is finished.
• Refill recommended oil through the filling plug (1).
• Check oil level in the checking opening (2). The oil
level must reach the lower edge of the opening or
slightly flow out.
• Mount the plugs (1) and (2), replace damaged plug
sealings.