69ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
Clogged air cleaner - signal lamp (25)
This lamp (on) indicates excessively clogged air filter.
! NOTE !
Replace filters immediately!
ASC differential lock - signal lamp (26)
Flashing lamp indicates a defect on ASC differential lock.
Note
For function description ASC, see chapter 2.7.8.
Hydraulic oil level - signal lamp (27)
This lamp (on) indicates oil level in the tank under the
lower limit. The machine and engine will automatically
stop (environmental protection).
! NOTE !
It is possible to start engine only after repairing the
defect and refilling oil in the hydraulic tank to
proper level!
Vibration on - signal lamp (28)
This lamp (on) indicates vibration is on.
Clogging of the pressure filter of hydraulic
oil - signal lamp (29)
At oil temperature of 50 - 60°C, this lamp (on) indicates
clogging of the filter.
! NOTE !
Replace the filter immediately!
Indicators - signal lamp (30)
The lamp is flashing when direction indicators are on.
! NOTE !
Check function of indicators.
To Next Page
Loading...
