Ammann ASC 70 - Engine Cooling Liquid Level Check; Hydraulic Oil Level Check

109ASC70
396205A
1
MIN
MAX
282114
MAX
MIN
STOP
MAINTENANCE MANUAL
3.6.2. Engine cooling liquid level check
With the engine at standstill, cooled down below 50°C (120°F),
check the cooling liquid level. Use ller neck (1) to rell.
The level must not drop below level indi-
cator eyesight.
Top up cooling liquid consisting of wa-
ter and antifreeze agents of the identical
base.
Do NOT use additives to remove any cool-
ing system leakages into the engine cool-
ing liquid!
Do NOT rell cold cooling liquid while
the engine is hot. Let the cooling liquid
temperature rop below 50 °C (120 °F).
Otherwise there is risk of engine casting
damaged.
Open the pressure cap only after engine
cooling liquid temperature drops below
50 °C (120 °F). When plug is removed at
high temperature there is risk of vapour
scald cooling liquid scald due to internal
overpressure.
3.6.3. Hydraulic oil level check
• Check and maintain the level. Indicator lamp will signal oil
loss below „STOP“ (engine stops).
Note
You can restart the engine only after oil is replenished. Rell
the same type of oil via lling device, refer to par. called “Oil Ex-
change”.