Ammann ASC 70 - Machine Cleaning

150 ASC70
3.6. Lubrication and Maintenance
3.6.36. Machine cleaning
• When work has ended, please clean the Machine to remove
any major dirt. Carry out overall cleaning on regular basis at
least once a week. When working on coherent soils, soil ce-
ments or lime stabilizations you must make overall cleaning
on daily basis.
Before pressure cleaning with the use of
water or steam, blind all the holes where
a cleaner might penetrate (e.g. via engine
suction holes). Remove these blinds once
the Machine is cleaned,.
Do NOT expose electric parts or insula-
tion material to direct stream of water or
steam. Always cover these materials (al-
ternator’s internal space, etc.).
Disconnect battery disconnector.
Execute the work with the engine shut o.
When using the cleaners, please proceed
in line with the Manufacturer’s Directions
for Use.
Do NOT use aggressive or easily ignitable
cleaners (for instance gasoline or easily
ignitable materials).
When cleaning, please proceed accord-
ing to the ecological standards and
regulations!
Clean the Machine at workplaces
equipped with cleaner retention (contain-
ment) system so to avoid contamination
of soil and water resources!
NEVER use forbidden cleaners!