Ammann ASC 70 - Oil in the Vibrator Check

123ASC70
1
2
396241A
MAINTENANCE MANUAL
3.6.13. Oil in the vibrator check
• Stop the Machine on at paved surface so the drum plugs
on LH side are in the position as per the Fig. Clean the spot
round the plug (1), unscrew plug (1) and check oil level. The
level has to be up to the hole or ow out slightly. Replenish
oil via the hole of plug (2). Clean the plugs and reinstall.
Fill in with the same type of oil.
Check oil only after oil cools down.
Avoid any oil leakage into the ground.