84 ASC70
A
B
2.9. Special conditions of the Machine use
2.9.1. Machine towing
• For towing, the machine is provided with two lugs (A) on the
drum frame and the rear row (B).
• A sunken machine can be towed for a short distance if the
engine is running and the travel drive and steering are wor-
king.
When towed the Machine shall be at-
tached with both lugs !
When towing, please use undamaged
towing cable or pull rod of sucient load-
ing capacity 1,5 higher than the weight
of hauled Machine. It is forbidden to use
achain for hauling.
It will be necessary to maintain minimal
deection from direct angle of hauling.
Max deection will be possible within an-
gle of up to 30°.
Smooth and constant movement must be
maintained when towing. Do not exceed
the towing speed by more than 1 km/hour
(0.62 mph).
The machine should only be towed for the
shortest possible distance – to extricate
the machine if it gets stuck or is blocking
trac in case of breakdown. Donot tow
the machine for a longer distance than
300 m (0.19 mi).
The hauling machine shall t with its size
the Machine broken. It shall have su-
cient hauling force (performance), weight
and brake eect.
When hauling downhill with the help of
cable it will be necessary to attach next
hauling machine to the rear part of the
Machine broken. In this way it will be pos-
sible to avoid uncontrolled motion of the
Machine damaged.