85ASC70
OPERATION MANUAL
Short-circuiting the travel pump:
• Disconnect the battery using the disconnector.
• Cut short the hydraulic circuit of the travel through loose-
ning the centre parts of both multifunctional valves by 3
turns in CCW direction.
No person may stay on the towed
machine!
After the hydraulic circuit of the machine
is short-circuited and the machine brake
is released, all of the brakes are disabled!
Before releasing the brake, secure the ma-
chine with wooden scotch blocks against
motion!
The cab (platform) and bonnet must
be moved down before the brakes are
released.
Do not touch hot parts of the machine,
burn hazard!
• If the engine does not work, or there is a defect in the hyd-
raulic system, you must short-circuit the hydraulic circuit
and release the brake of the machine. Then the machine can
be towed.
To Next Page
Loading...
