Ammann ASC 70 - Reguirements on Drivers Qualification

23ASC70
OPERATION MANUAL
2.1.2. Reguirements on Driver’s Qualication
• Only adriver trained under ISO 7130 and other local and na-
tional regulations designed for drivers of this group of ma-
chines may operate the Roller (Compacter).
• With no licence only the one who learns driving the Machi-
ne for the purpose of getting preliminary practice with the
approval of User may drive the Machine, and such person
has to be under direct and continuous surveillance of pro-
fessional teacher or trainer.
• Licence holder is liable to take due care of the licence, and
when requested, put it forward to the control authorities.
• Licence holder can make no registrations, changes or corre-
ctions in the licence card.
• He/she is liable to promptly report his/her licence loss to the
authority that issued this licence.
• Driving the Roller alone may be performed by an employee
mentally and physically t, over 18 years old, who is:
a) assigned by machine manufacturer for the assembly,
testing and presentation of the Machine, for training
the drivers, whereas he/she must be made familiar with
safety work regulations in force at the workplace
or
b) assigned by Constructional Supplier to operate (carry
out maintenance) and is evidently trained and acquaint-
ed with, or owns professional competence to operate
and drive under special regulations (machinist licence,
etc.).
• Machine driver must undergo training and examination con-
cerning work safety regulations at least 1x every 2 years.