Ammann ASC 70 - Machine Parking

To Next Page

To Previous Page

72 ASC70

2.7. Machine control and use

2.7.5. Machine parking

• Stop the Machine, switch OFF battery disconnector

• Clean the Machine to get rid of any coarse dirt.

• Carry out overall inspection of the Machine and repair any

defects that occurred during operation.

• Check sucient pressure in tyres.

• Use scotch blocks to secure the wheels and drum.

• Lock the covers of instruments or cab and door underneath

the Driver’s control stand.

Shut down the Machine on at and paved

surface. Conrm there is no potential

of natural hazard (landslide, potential

ooding due to any deluges, etc.) at the

location.

3351

30 sec

Switch o the battery discon-

nector no sooner than 30 sec-

onds after removing the key

from the ignition switch.

Keeping of the time limit is nec-

essary for saving the data of the

ECM motor.

Other manuals for Ammann ASC 70