Ammann ASC 70 - Loading the Machine; Loading the Machine Using a Ramp

82 ASC70
274212
MAX 30 %
2.8. How to transport the Machine
2.8.1. Loading the machine
• Use a loading ramp or crane to load the machine onto the
transport vehicle.
Non-adherence to the prescribed param-
eters of the ramp may result in damage to
the machine.
When loading the machine, a second per-
son must be present to signal approach
onto the ramp. See the list of hand signals
in chapter 2.1.6.
2.8.1.1. Loading the machine using a ramp
• When loading the machine using a ramp, all safety regula-
tions related to loading of the machine valid in the place of
loading must be adhered to. The ramp must have appropri-
ate loading capacity, antislip surface and must be stored on
a at surface. We recommend that you adhere to regulation
BGR 233.
• Maximum permissible incline of the ramp is 30 %.
Pay increased attention when loading the
machine. Improper handling can cause
serious injury or death.