Ammann ASC 70 - Engine Oil Change; Every 250 Hours of Operation (3 Months)

114 ASC70
396219A
396220
3.6. Lubrication and Maintenance
Every 250 hours of operation (3 months)
3.6.9. Engine oil change
Drain oil while it is hot right after opera-
tion is nished, or warm up the engine
while in operation until cooling liquid
temperature reaches 60°C (140°F).
Observe re precautions!
In case of work in a very dusty environ-
ment, shorten the engine oil replacement
intervals.
Pay max attention when draining hot oil,
danger of scald. Let the oil cool down be-
low 50°C (122°F).
• Remove drain plug and let oil pour out into the vessel of 8 l
(10 qt) capacity - reinstall the plug.
• Clean the oil lter and its vicinity. Remove the lter.