Ammann ASC 70 - Page 133

129ASC70
396284
396213
MAINTENANCE MANUAL
• Clean the inside of the cleaner and contact surface in order
that the engine inlet pipe does not get blocked.
• Check connections and piping for any untightness and
clogging of the engine inlet opening on the bonnet (e.g. by
leaves).
• Insert the safety element.
• Mount the new main element. Check whether the both car-
triges ts correctly and whether are sealing.
• Remove the dust valve, clean it and mount it back.
Dust valve
Order number: 1-952454
! CAUTION !
Do NOT clean lter’s inner space with pressure air so
no dust is taken into the engine induction manifold.
Use original elements, only.
Check after installation whether it seals.
When washing the Machine be careful not to spray
water into the air lter.
Replace the dust valve immediately if it is damaged!
NEVER operate the Machine with lter body or lid
damaged.
In case of work in a very dusty environment, shorten
the cleaning intervals.