Ammann ASC 70 - Page 82

78 ASC70
396080
1
2
396081
2.7. Machine control and use
• Floating blade can be used when bulldozing a material on
a paved area. Floating position may also be applied when
spreading and levelling again the material being spread.
The blade will skim on removable skids.
• When work with blade is completed, please secure it in its
upper position with the help securing tie rods (1) and pivots
(2) on both sides.
Note
The blade edges are able to dismount, and when worn out you
may turn them round by 180°.
Do NOT perform any adjusting of scrap-
ers or any work on the blade unless blade
is descended on the ground and engine
stopped, or unless blade is secured with
both locking tie rods.
Do not operate the blade if it is locked.
If attached to one securing tie rod, there is
hazard of blade damaged.