87ASC70
OPERATION MANUAL
• Turn on the battery disconnector.
• Switch over the key to the position “I”.
• Pump using the lever in the manual hydrogenerator.
• Watch, until the brake indicator lamp goes out when the key
is on. The cylinder brake is released and the machine can be
towed.
• When the electrical installation is not operating, pump
using the lever in the manual hydrogenerator with 30 full
strokes at least (one stroke = lever movement to the left and
to the right).
Due to leakages, the pressure in the
brakes can drop during the towing.
Check the drum or tyres of the towed
machine for the occurrence of braking or
skidding. In such a case interrupt the tow-
ing and pump again using the lever in the
manual hydrogenerator.
When towing is completed, please secure
the wheels and drum with scotch blocks
(cotters), and put into initial state.
How to put into initial state
• Disconnect the battery using the disconnector.
• Screw back the multi-purpose valves on the travel hydroge-
nerator.
To Next Page
Loading...
