Analog way Pulse 2 User Manual

40
Under the ASPECT RATIO secon:
- ASPECT IN: forces a parcular aspect rao for the source. (5:4, 4:3, etc). This seng has no eect when set
to nave,
- PREDEFINED CROP: choose a specic cropped rao if you use a source with black bands on top/boom or
le/right,
- ASPECT OUT: dene the way the image will be displayed into a layer (full screen, centered, cropped or 1:1),
- OVERSCAN: choose to apply or not a predened zoom on the image (use with video signal).
Under the CROP secon:
- TOP/BOTTOM/LEFT/RIGHT: use the Top, Boom, Le and Right values to crop your input.
The next tab is the USER FORMAT:
In this tab, you can explicitly dene the input format. The input
format is automacally detected by the Pulse² but you can change
it or force it. The available formats are close to the current one, in
terms of lines. This is only available for analog computer formats.
Keying Feature
With the keying feature, you will be able to key easily a color space
or a specic luma on an input.
The device oers an individual keying for each input. Into the input
sengs, nd the keying menu:
You have 2 ways of using the keying:
- COLORKILLER: classic color keyer removing a specic color space
dened by user,
- LUMAKILLER: luma keyer removing a specic luminance level range.
Keying setup can be done either by seng directly color references and tolerances or by using the color grab
assistant.
- INVERT BUTTON: at any me you can choose to invert the actual keying using this buon.
7.2.7 Input management

Analog way Pulse 2 Specifications

General

Brand	Analog way
Model	Pulse 2
Category	Music Mixer
Language	English