Anritsu Site Master S331L Scpi Programming Manual

Chapter 1 — General Information 1-4 Sending SCPI Commands
S331L PM PN: 10580-00322 Rev. F 1-9
Ethernet Connectivity
1. On the PC, run NI Measurement & Automation Explorer or VISA Interactive Control
and create a new LAN Resource under Network Devices. Add the TCP/IP resource
using a Manual Entry of Raw Socket, as shown in the example below.
Figure 1-7. NI VISA Interactive Control LAN Resource Addition Using Raw Socket


Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English