Anritsu Site Master S331L Scpi Programming Manual

Chapter 3 — All Mode Commands
3-6 PN: 10580-00322 Rev. F S331L PM
:MMEMory:STORe:TRACe <integer>,<"filename">
Cmd Description: Stores the trace data and settings into a file with specified type.
Param Type: Integer, String
Param Description: Param1: An integer representing the file type where 1 or 0 :
Measurement file (default), 5: Text (only valid in CAA), 6: CSV (only
valid in CAA), Param2: Filepath without extension.
Example: To save a measurement (include directory path, do not include
extension):
:MMEM:STOR:TRAC 0, "/internal/temp"
:PROGram:ETT:ABORtscript
Cmd Description: Command exits easy-test mode.
Example: To abort ETT mode:
:PROG:ETT:ABOR
:PROGram:ETT:LOADscript <"filename">
Cmd Description: Command begins easy-test mode with the given filename.
Param Description: Filename with .ett extension
Example: To enter ETT mode:
:PROG:ETT:LOAD "/internal/my-test.ett"
:PROGram:ETT:NEXTstep
Cmd Description: Command performs the next step while in easy-test mode.
Example: To proceed to the next step in ETT mode:
:PROG:ETT:NEXT
:PROGram:ETT:STATe?
Example: To get the ETT state:
:PROG:ETT:STAT?
:SYSTem:CODeload
Cmd Description: Command performs a firmware update from a USB drive.
Example: To initiate a firmware update:
:SYST:COD

Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English