Anritsu Site Master S331L Scpi Programming Manual

Chapter 4 — Cable & Antenna Analyzer Mode Commands
4-16 PN: 10580-00322 Rev. F S331L PM
:CALCulate:TRANsform:DISTance:STARt <distance>{ m|cm|mm,ft}
:CALCulate:TRANsform:DISTance:STARt?
Cmd Description: Command sets the start distance. Verify the appropriate unit is used.
Query Description: Query returns the start distance in the current units.
Param Type: Float
Param Description: Distance
Default Units: m(meter)
Example: To set start distance to 1 m:
:CALC:TRAN:DIST:STAR 1
:CALCulate:TRANsform:DISTance:STOP <distance>{ m|cm|mm,ft}
:CALCulate:TRANsform:DISTance:STOP?
Cmd Description: Command sets the stop distance. Verify the appropriate unit is used.
Query Description: Query returns the stop distance in the current units.
Param Type: Float
Param Description: Distance
Default Units: m(meter)
Example: To set stop distance to 2 m:
:CALC:TRAN:DIST:STOP 2 M
:CALCulate:TRANsform:DISTance:UNIT METers|FEET
:CALCulate:TRANsform:DISTance:UNIT?
Cmd Description: Command sets the distance unit.
Query Description: Query returns the current distance units.
Param Range: METers|FEET
Default Value: METers
Example: To set distance unit to feet:
:CALC:TRAN:DIST:UNIT FEET

Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English