Anritsu Site Master S331L Scpi Programming Manual

Chapter 3 — All Mode Commands
3-8 PN: 10580-00322 Rev. F S331L PM
[:SENSe]:BASe:NET:MANual:GATEway <"Default-Gateway">
[:SENSe]:BASe:NET:MANual:GATEway?
Cmd Description: Command sets the static Gateway.
Query Description: Query returns the static Gateway in string format.
Param Type: String
Param Description: Default Gateway
Example: To set static Gateway:
:BAS:NET:MAN:GATE "192.35.101.1"
[:SENSe]:BASe:NET:MANual:IP <"IP-address">
[:SENSe]:BASe:NET:MANual:IP?
Cmd Description: Command sets the static IP address.
Query Description: Query returns the static IP address in string format.
Param Type: String
Param Description: IP address
Example: To set static IP address:
:BAS:NET:MAN:IP "192.35.100.1"
[:SENSe]:BASe:NET:MANual:SUBnet <"Subnet-Mask">
[:SENSe]:BASe:NET:MANual:SUBnet?
Cmd Description: Command sets the static Subnet Mask.
Query Description: Query returns the static Subnet Mask in string format.
Param Type: String
Param Description: Subnet Mask
Example: To set static Subnet Mask:
:BAS:NET:MAN:SUB "255.255.252.0"
[:SENSe]:BASe:NET:MODE MANual|DHCP
[:SENSe]:BASe:NET:MODE?
Cmd Description: Command sets the Ethernet configuration to DHCP or static (manual).
Query Description: Query returns the Ethernet configuration.
Param Type: Character
Param Description: MANual|DHCP
Example: To set the Ethernet configuration to static (manual):
:BAS:NET:MODE MAN

Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English