Anritsu Site Master S331L Scpi Programming Manual

Chapter 2 — Programming with SCPI 2-3 Subsystem Commands
S331L PM PN: 10580-00322 Rev. F 2-5
A colon (:) separates each subsystem. For example, the command
:SENSe:FREQuency:STARt <freq> sets the start frequency. The start frequency is part of
the :FREQuency subsystem which is part of the :SENSe subsystem. Stop frequency is also
part of the :SENSe:FREQuency subsystem. It is specified by :SENSe:FREQuency:STOP.
Query Commands
All commands, unless specifically noted in the commands syntax descriptions, have a query
form. As defined in IEEE-488.2, a query is a command with a question mark symbol
appended (examples: *IDN? and :OPTions?). When a query form of a command is received,
the current setting associated with the command is placed in the output buffer. Query
commands always return the short form of the parameter unless otherwise specified. Boolean
values are returned as 1 or 0, even when they can be set as on or off.
Figure 2-2. SCPI :CONFigure Subsystem
:CONFigure
:ACPower
:CHPower
:DEMOD
:FSTRength
:MEASure
:MENU
:S11
:1PHASEe
:SMCHart
:VSWR
:OBWidth
:OTA
:Pfail
:PM
:PVTFrame
:PVTSlot
:RF
:SPECTRUM
:MULTi
:SINGle
:SUMMARY
:VNA

Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English