Anritsu Site Master S331L Scpi Programming Manual

S331L PM PN: 10580-00322 Rev. F 3-1
Chapter 3 — All Mode Commands
The commands in this section apply to all instrument modes.
*IDN?
Query Description: Provides information about the device. Return format:
Anritsu,<model-number>/<options>,<serial-number>,<package-version
>
Example: To get device information:
*IDN?
*OPC?
Query Description: Blocks the SCPI engine from receiving new commands until system
completes all pending operations. Returns 1 for operation complete.
Example: To block until operation is complete:
*OPC?
:BASe:DIRectory:COPY
<"source-directory">,<"destination-directory">
Cmd Description: Copy all files from source directory to destination directory.
Param Type: String, String
Param Description: Source directory, Destination directory
Example: To copy a directory:
:BAS:DIR:COPY "/internal/folder1/",
"/internal/folder2/"
:BASe:DIRectory:DELete <"directory">, {1|0}
Cmd Description: Delete contents in a directory.
Param Type: String, Integer
Param Description: Param1: Directory path, Optional Param2: Delete mode - 1 to delete the
directory and contents, 0 to delete contents only. Default is 0.
Example: To delete the contents of a directory:
:BAS:DIR:DEL "/internal/folder1/"

Anritsu Site Master S331L Specifications

General

Brand	Anritsu
Model	Site Master S331L
Category	Measuring Instruments
Language	English