Anritsu Spectrum Master MS2720T User Manual

3-12 Measurements Menu W-CDMA/HSPA+ Signal Analyzer
3-40 PN: 10580-00234 Rev. T 3GPP MG
Multipath Menu
Key Sequence: Measurements > OTA > Multipath
EMF Menu
Key Sequence: Measurements > OTA > EMF
Refer to “W-CDMA EMF Menu” on page 8-10.
Scrambling Code: Set the scrambling codes to manual or auto.
Manual Scrambling Code: Sets the manual scrambling code.
Vert Display: Switch vertical display between RSCP and Rel Pwr.
Horiz Display: Switch between Chips and uSec for the horizontal display.
Distance: Switch between meters and feet.
Back: Returns to the “Over-The-Air Menu” on page 3-38.
Figure 3-31. W-CDMA/HSPA+ Multipath Menu
Multipath
Scrambling Code
Auto Manual
Manual Scrambling
Code
351
Vert Display
RSCP Rel Pwr
Horiz Display
Chips uSec
Distance
m ft
Back
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English