Anritsu Spectrum Master MS2720T - Pass Fail Mode Menu

Chapter 3 —Mobile WiMAX Signal Analyzer 3-11 Measurements Menu
WiMAX MG PN: 10580-00236 Rev. D 3-29
Pass Fail Mode Menu
Key Sequence: Measurements > Pass/Fail
Select Pass/Fail Test: Press this submenu key to select a pass/fail test
from the list of available Pass/Fail tests. The default list is:
• PASS_FAIL_RF
• PASS_FAIL_DEMOD
• PASS_FAIL_ALL
You can create a user-defined file by using Master Software Tools. Refer to
“Pass/Fail Mode” on page 3-16.
Reset: Press this submenu key to restart a Pass/Fail test.
Back: Press this submenu key to return to the “Measurements Menu” on
page 3-24.
Figure 3-26. Mobile WiMAX Pass/Fail Menu
Back
Pass Fail Mode
Reset
Select
Pass/Fail
Test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com