Anritsu Spectrum Master MS2720T User Manual

2-6 Tracking Generator Menus Chapter 2 — E-Series Tracking Generator
2-10 PN: 10580-00339 Rev. C Tracking Generator MG
2-6 Tracking Generator Menus
To access the functions under the Measure menu, press the Shift key, then the
Measure (4) key. The addition of Option 20 adds the Tracking Generator submenu key and
subsequent menus, as shown Figure 2-10. Menu maps typically display all possible submenu
keys, although some keys are displayed on the instrument only under special circumstances
(refer to menu descriptions).
Figure 2-10. Measure Menu with Tracking Generator (Option 20)
Note
General Spectrum Analyzer measurement menu including Frequency, Ampl
itude, Span, Bandwidth, Marker, Sweep, Trace, and Limit menus are detailed in
the Spectrum Analyzer Measurement Guide (p/n 10580-00244).
General instrument operating functions including the Preset, File, Mode and
System are described in the instrument User Guide.
Generator
Output Power
-50 dBm
CW Frequency
1.000 GHz
Generator Output
On Off
Generator Mode
CW Tracking
Refer to 10580-00244
Spectrum Analyzer
Measurement Guide
All Measurements Off
Measure
Power and
Bandwidth
Masks and
C/I
AM/FM
Demod
Generator
Coverage
Mapping
Settings
Transmission
Measurement
Back
Settings
Ext Gain/Loss
0.0 dB Ext Gain
Relative Ref
10.0 dB
Relative Scale
10 dB/div
Transmission
Offset
0.0 dB
Additional
Calibration Sweep
Power Statistics
Off On
Enhanced Generator
Power Accuracy
Back
Gen Power Accuracy
Matching Pads(3dB)
Zero One Two
Enhanced Accuracy
Calibration
On Off
Transmission
Statistics
Off On
Back
Transmission
Normalize
Off On
Back
Refer to 10580-00244
Spectrum Analyzer
Measurement Guide
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English